Long-term outcome of total hip arthroplasty in patients with multiple hereditary exostosis.

BACKGROUND: Multiple hereditary exostosis (MHE) is a rare autosomal dominant disorder characterized by multiple osteochondromas. There is a paucity of literature concerning total hip arthroplasty (THA) in patients with MHE. The aim of this study is to report long-term outcomes of THA in patients with MHE. METHODS: Fourteen patients undergoing 15 THA's for the treatment of osteoarthritis in the presence of osteochondromas and proximal femoral deformity secondary to MHE were reviewed. Mean age at the time of surgery and follow-up was 56 and 12 years. Seven (47%) had uncemented femoral components. Eleven hips had coxa valga on preoperative imaging. Clinical outcomes were assessed with both Harris hip scores (HHS) and Musculoskeletal Tumor Society Scores (MSTS). RESULTS: Following surgery, there was an improvement in the HHS (48-82, p < 0.01) and MSTS scores (41-70%, p < 0.01). Complications occurred in 5 patients leading to reoperation in 3 patients, of which 2 patients underwent a revision procedure at 19 and 20-years postoperative. The 10-year revision free survival was 100%. CONCLUSIONS: THA in the setting of MHE reliably improves patient function. One in three patients will have a postoperative complication; however, the long-term incidence of revision is low.

Effects of hip brace on coxa valga in nonambulatory children with cerebral palsy: A randomized controlled trial.

BACKGROUND: Coxa valga, measured as the neck-shaft angle (NSA) or head-shaft angle (HSA), is regarded as a potential risk factor for hip dislocation in patients with cerebral palsy. We investigated the effects of a novel hip brace on coxa valga. METHODS: A prospective, multicenter, assessor-blinded, randomized controlled trial was conducted from July 2019 to November 2021. Children with cerebral palsy aged 1 to 10 years with Gross Motor Function Classification System levels IV and V were recruited. The study group wore a hip brace for at least 12 hour a day. A lower strap of the hip brace was designed to prevent coxa valga biomechanically. The effectiveness of the hip brace on coxa valga was assessed by measurement of the NSA and head-shaft angle at enrollment and 6 and 12 months after enrollment. RESULTS: Sixty-six participants were enrolled, and 33 patients were assigned to each group. Changes in the mean NSA of both sides and the NSA of left side showed significant differences between the 2 groups over 12 months (mean NSA of both sides, -1.12 ± 3.64 in the study group and 1.43 ± 3.75 in the control group, P = .023; NSA of the left side, -1.72 ± 5.38 in the study group and 2.01 ± 5.22 in the control group, P = .008). CONCLUSIONS: The hip brace was effective in preventing the progression of coxa valga and hip displacement, suggesting that the prevention of coxa valga using hip brace is a contributing factor in prevention of hip displacement.

Virtual 3D femur model to assess femoral version: comparison to the 2D axial slice approach.

BACKGROUND: Quantifying femoral version is crucial in diagnosing femoral version abnormalities and for accurate pre-surgical planning. There are numerous methods for measuring femoral version, however, reliability studies for most of these methods excluded children with hip deformities. OBJECTIVE: To propose a method of measuring femoral version based on a virtual 3D femur model, and systematically compare its reliability to the widely used Murphy's 2D axial slice technique. MATERIALS AND METHODS: We searched our imaging database to identify hip/femur CTs performed on children (<18 years old) with a clinical indication of femoral version measurement (September 2021-August 2022). Exclusion criteria were prior hip surgery, and inadequate image quality or field-of-view. Two blinded radiologists independently measured femoral version using the virtual 3D femur model and Murphy's 2D axial slice method. To assess intrareader variability, we randomly selected 20% of the study sample for re-measurements by the two radiologists >2 weeks later. We analyzed the reliability and correlation of these techniques via intraclass correlation coefficient (ICC), Bland-Altman analysis, and deformity subgroup analysis. RESULTS: Our study sample consisted of 142 femurs from 71 patients (10.6±4.4 years, male=31). Intra- and inter-reader correlations for both techniques were excellent (ICC≥0.91). However, Bland-Altman analysis revealed that the standard deviation (SD) of the absolute difference between the two radiologists for the Murphy method (mean 13.7°) was larger than that of the 3D femur model technique (mean 4.8°), indicating higher reader variability. In femurs with hip flexion deformity, the SD of the absolute difference for the Murphy technique was 17°, compared to 6.5° for the 3D femur model technique. In femurs with apparent coxa valga deformity, the SD of the absolute difference for the Murphy technique was 10.4°, compared to 5.2° for the 3D femur model technique. CONCLUSION: The 3D femur model technique is more reliable than the Murphy's 2D axial slice technique in measuring femoral version, especially in children with hip flexion and apparent coxa valga deformities.

Guided Growth Improves Coxa Valga and Hip Subluxation in Children With Hereditary Multiple Exostoses.

BACKGROUND: In children with severe hereditary multiple exostoses (HME), coxa valga, and hip subluxation are common deformities. The literatures related to surgical management and prevention of hip joint subluxation in HME are scarce. In this study, we aimed to investigate the efficacy of guided growth procedure to correct coxa valga and hip subluxation in HME patients. METHODS: We retrospectively retrieved 12 patients who received guided growth procedures for coxa valga and hip subluxation in HME patients with proximal femur exostoses with a minimum follow-up time of 2 years between 2012 and 2019. Radiographic parameters include head-shaft angle, Hilgenreiner-epiphyseal angle, acetabular index, Reimer migration percentage, center-edged angle, articulo-trochanteric distance, and femoral neck length for comparison between preoperative and latest follow-up results. It was conducted statistically by paired t test and Wilcoxon signed rank test. RESULTS: In this study, the mean difference between preoperative and latest follow-up was significant in head-shaft angle (12±5 degrees; CI, 10-14; P<0.001), Hilgenreiner-epiphyseal angle (12±5 degrees; CI, 10-15; P<0.001), and MP (7%±8%; CI, 3-11; P=0.001). There was a low revision rate (4 of 21, 19%) and no complication in our study. Compared with previous studies on guided growth in children with cerebral palsy and developmental dysplasia of the hip, our study showed good comparable outcomes. CONCLUSION: The results indicated that guided growth improves the hip radiographic parameters of children with HME and may prevent coxa valga and hip subluxations. It is a safe procedure and provides predictable results. LEVEL OF EVIDENCE: Level IV; therapeutic, case series.

Debilitating hip degeneration in trichothiodystrophy: Association with ERCC2/XPD mutations, osteosclerosis, osteopenia, coxa valga, contractures, and osteonecrosis.

Trichothiodystrophy (TTD) is a rare, autosomal recessive, multisystem disorder of DNA repair and transcription with developmental delay and abnormalities in brain, eye, skin, nervous, and musculoskeletal systems. We followed a cohort of 37 patients with TTD at the National Institutes of Health (NIH) from 2001 to 2019 with a median age at last observation of 12 years (range 2-36). Some children with TTD developed rapidly debilitating hip degeneration (DHD): a distinctive pattern of hip pain, inability to walk, and avascular necrosis on imaging. Ten (27%) of the 37 patients had DHD at median age 8 years (range 5-12), followed by onset of imaging findings at median age 9 years (range 5-13). All 10 had mutations in the ERCC2/XPD gene. In 7 of the 10 affected patients, DHD rapidly became bilateral. DHD was associated with coxa valga, central osteosclerosis with peripheral osteopenia of the skeleton, and contractures/tightness of the lower limbs. Except for one patient, surgical interventions were generally not effective at preventing DHD. Four patients with DHD died at a median age of 11 years (range 9-15). TTD patients with ERCC2/XPD gene mutations have a high risk of musculoskeletal abnormalities and DHD leading to poor outcomes. Monitoring by history, physical examination, imaging, and by physical medicine and rehabilitation specialists may be warranted.

Impaired bone quality in the superolateral femoral neck occurs independent of hip geometry and bone mineral density.

Skeletal adaptation is substantially influenced by mechanical loads. Osteocytes and their lacuno-canalicular network have been identified as a key player in load sensation and bone quality regulation. In the femoral neck, one of the most common fracture sites, a complex loading pattern with lower habitual loading in the superolateral neck and higher compressive stresses in the inferomedial neck is present. Variations in the femoral neck-shaft angle (NSA), i.e., coxa vara or coxa valga, provide the opportunity to examine the influence of loading patterns on bone quality. We obtained femoral neck specimens of 28 osteoarthritic human subjects with coxa vara, coxa norma and coxa valga during total hip arthroplasty. Bone mineral density (BMD) was assessed preoperatively by dual energy X-ray absorptiometry (DXA). Cortical and trabecular microstructure and three-dimensional osteocyte lacunar characteristics were assessed in the superolateral and inferomedial neck using ex vivo high resolution micro-computed tomography. Additionally, BMD distribution and osteocyte lacunar characteristics were analyzed by quantitative backscattered electron imaging (qBEI). All groups presented thicker inferomedial than superolateral cortices. Furthermore, the superolateral site exhibited a lower osteocyte lacunar density along with lower lacunar sphericity than the inferomedial site, independent of NSA. Importantly, BMD and corresponding T-scores correlated with microstructural parameters at the inferomedial but not superolateral neck. In conclusion, we provide micromorphological evidence for fracture vulnerability of the superolateral neck, which is independent of NSA and BMD. The presented bone qualitative data provide an explanation why DXA may be insufficient to predict a substantial proportion of femoral neck fractures. STATEMENT OF SIGNIFICANCE: The femoral neck, one of the most common fracture sites, is subject to a complex loading pattern. Site-specific differences (i.e., superolateral vs. inferomedial) in bone quality influence fracture risk, but it is unclear how this relates to hip geometry and bone mineral density (BMD) measurements in vivo. Here, we examine femoral neck specimens using a variety of high-resolution imaging techniques and demonstrate impaired bone quality in the superolateral compared to the inferomedial neck. Specifically, we found impaired cortical and trabecular microarchitecture, mineralization, and osteocyte properties, regardless of neck-shaft angle. Since BMD correlated with bone quality of the inferomedial but not the superolateral neck, our results illustrate why bone densitometry may not predict a substantial proportion of femoral neck fractures.

The effectiveness of adding guided growth to soft tissue release in treating spastic hip displacement.

BACKGROUND: Guided growth at the proximal femur using one transphyseal screw corrects coxa valga and improves hip displacement in cerebral palsy. This study aimed to validate the effects of adding guided growth (GG) to soft tissue release (STR), in terms of decreasing the migration percentage (MP), compared to those with soft tissue alone. METHODS: This retrospective study comprised patients with cerebral palsy who underwent soft tissue release alone (Group STR) or soft tissue release plus guided growth (Group GG) for hip displacement (mean age, 8.1 years; mean follow-up, 4.9 years). Difference in the MP and rate of controlling MP <40% at 2 years postoperatively and rate of revision surgeries at 5 years postoperatively were compared between the groups. RESULTS: The two groups were comparable in age, side, and gross motor function level, but Group GG (n = 24) had more severe hip displacement preoperatively than did Group STR (n = 64). Group GG had a significantly greater 2-year decrease in the MP (-14.8% vs. -11.8%, p < 0.05) than did Group STR. Among patients with a pre-operative MP >50%, the rate of MP <40% was greater in Group GG (73%) than in Group STR (41%). Revision surgeries, mainly repeated guided growth and soft tissue release, were comparable between the groups. CONCLUSIONS: This is the first comparative study to support adding guided growth to soft tissue release, as it results in greater improvements in hip displacement than that with soft tissue release alone. Non-ambulatory patients or severe hip displacement with MP 50%-70% could benefit from this less aggressive surgery by controlling the MP under 40% without femoral osteotomy.

Multivariate analysis of the relationship between gluteal muscle contracture and coxa valga.

BACKGROUND: Gluteal muscle contracture (GMC) is a disease characterized by the limited function of the hip joint, knee pain, and abnormal gait. There is a lack of research on the effect of GMC on the hip joint structure to date. This study aims to analyze the association between GMC and the deformity of the hip and pelvis. METHODS: Standing anteroposterior pelvic radiographs of 214 patients (152 with gluteal muscle contracture and 62 without gluteal muscle contracture) were retrospectively collected. Neck-shaft angle, lateral center edge angle, Tönnis angle, femoral head coverage index, acetabular depth, Sacro-femoral-pubic angle, and obturator foramen ratio were respectively measured and included in the following statistical analysis. The collected data were analyzed using logistical regression and multiple linear regression to explore the factors influencing coxa valga and SFP angle. RESULTS: GMC was identified as a common factor significantly associated with coxa valga and increased SFP angle. There is a difference of risk factors in logistic regression for coxa valga between the left and right sides. CONCLUSION: GMC is a significant risk factor for coxa valga and increased SFP angle. Given that GMC can cause coxa valga and likely alter the pelvis's position, GMC should be paid attention to and treated early.

Does screw position matter for guided growth in cerebral palsy hips?

AIMS: Guided growth has been used to treat coxa valga for cerebral palsy (CP) children. However, there has been no study on the optimal position of screw application. In this paper we have investigated the influence of screw position on the outcomes of guided growth. METHODS: We retrospectively analyzed 61 hips in 32 CP children who underwent proximal femoral hemi epiphysiodesis between July 2012 and September 2017. The hips were divided into two groups according to the transphyseal position of the screw in the coronal plane: across medial quarter (Group 1) or middle quarter (Group 2) of the medial half of the physis. We compared pre- and postoperative radiographs in head-shaft angle (HSA), Reimer's migration percentage (MP), acetabular index (AI), and femoral anteversion angle (FAVA), as well as incidences of the physis growing-off the screw within two years. Linear and Cox regression analysis were conducted to identify factors related to HSA correction and risk of the physis growing-off the screw. RESULTS: A total of 37 hips in Group 1 and 24 hips in Group 2 were compared. Group 1 showed a more substantial decrease in the HSA (p = 0.003) and the MP (p = 0.032). Both groups had significant and similar improvements in the AI (p = 0.809) and the FAVA (p = 0.304). Group 1 presented a higher incidence of the physis growing-off the screw (p = 0.038). Results of the regression analysis indicated that the eccentricity of screw position correlated with HSA correction and increases the risk of the physis growing-off the screw. CONCLUSION: Guided growth is effective in improving coxa valga and excessive femoral anteversion in CP children. For younger children, despite compromised efficacy of varus correction, we recommend a more centered screw position, at least across the middle quarter of the medial physis, to avoid early revision. Cite this article: Bone Joint J 2020;102-B(9):1242-1247.

Modular stem in total hip arthroplasty for patients with trochanter valgus deformity: surgical technique and case series.

BACKGROUND: Trochanter valgus deformity (TVD) is a rare condition of total hip arthroplasty (THA). Femoral osteotomy could be required in correcting the deformity to implant femoral stem in severe TVD. In this study, we described one unpublished technique of reverse sleeve of S-ROM to get through the complex situation. This study aimed to summarize and evaluate its technical challenges, safety and effectiveness. METHODS: From January 2006 to December 2014, we enrolled patients whose sleeves were implanted towards the great trochanter in THA with TVD. Their demographics, perioperative and postoperative information were recorded. To explore its indication, we measured and analyzed the ratio of greater trochanter/lesser trochanter (G/L ratio) and trochanter valgus angle (TVA). RESULTS: Twelve patients (1 male and 11 female, average age 42.30 ± 10.23) had mean follow-up of 6 years. Among them, only two patients had intraoperative femoral fracture. The survivorship of femoral prosthesis was 100%. The Harris hip score (HHS) increased from preoperative 34.31 ± 14.43 to postoperative 84.12 ± 11.33. All patients' G/L ratio were larger than 1.50. CONCLUSIONS: The reverse sleeve of S-ROM was a reliable method for the patients with severe TVD, which brought satisfying clinical outcomes in mid-term follow-up.

Can we predict failure of percutaneous fixation of femoral neck fractures?

PURPOSE: This study evaluated a series of geriatric femoral neck fracture treated with closed reduction percutaneous pinning (CRPP) at a single level-1 trauma center to determine if there are any simple, reliable, radiographic characteristics that can be used to predict increased risk of post-operative failure in nondisplaced and valgus impacted fracture patterns. METHODS: We conducted a retrospective cohort study of all patients with femoral neck fractures (AO/OTA 31B) who underwent CRPP over a 12-year period at a single Level 1 trauma center. Failure was defined as radiographic failure within the first year after the index operation requiring revision surgery. Common patterns identified on initial review were the presence of a visible medial transcervical line (MTL) felt to indicate a tension-sided failure, a straight inferior calcar (SIC) indicating severe valgus impaction, and quality of intra-operative screw positioning. X-rays of patients were then reviewed for these characteristics in a blinded manner by three different trauma-fellowship trained orthopedic surgeons. Inter-rater reliability was calculated using Fleiss' Kappa Coefficient. Comparisons of failure rates between groups were made using a Fisher's Exact test. RESULTS: 139 patients who underwent CRPP for a femoral neck fracture and follow-up for at least 90 days were identified and reviewed. There were a total of 19 failures (13.6%) within one year. The patients with a varus fracture had a failure rate of 9/24 (37.5%). Of the valgus/nondisplaced fractures, MTL was identified in 42/115 (36%) patients. Inter-rater agreement was high for the presence of an MTL (84%, Kappa 0.69). Patients with an MTL had a fourfold increase in risk of failure (7/42=17% with an MTL vs. 3/73=4% without, p  0.03). The presence of a SIC and quality of screw placement were not predictive of failure. CONCLUSION: Varus femoral neck fractures fixed with CRPP have a high rate of failure (37.5%). Nondisplaced or valgus impacted fractures with the presence of a visible medial transcervical line on pre-operative radiographic imaging resulted in a fourfold increase in the risk of failure after CRPP. Identification of the MTL will help treating surgeons better council patients when making pre-operative decisions between arthroplasty and CRPP.

Guided Growth Improves Coxa Valga and Hip Subluxation in Children with Cerebral Palsy.

BACKGROUND: Spastic hip subluxation or dislocation that is associated with an excessive coxa valga deformity is a common pathologic condition in children with cerebral palsy (CP) that is often treated with large bone reconstructive procedures. Guided growth techniques (such as stapling, plate, or transphyseal screw) have been widely used to alter the growth axis in patients with a lower-limb deformity but only a few reports have described their use in patients with coxa valga deformities. QUESTIONS/PURPOSES: (1) Does guided growth surgery using a transphyseal screw combined with adductor tenotomy prevent progressive coxa valga deformity and lateral hip subluxation in children with CP? (2) What factors influence the correction of coxa valga deformity and the success of hip stabilization? (3) What complications were associated with this operation and how often did children treated with it undergo reoperation? METHODS: From 2012 to 2016, at our institution, three authors (H-CH, KNK, K-WW) retrospectively studied data on children with CP who underwent guided growth of the hip for progressive bilateral hip subluxation associated with coxa valga deformities. A single percutaneous screw was inserted across the inferomedial portion of proximal femoral physis in an AP view and centered along femoral neck in lateral view under fluoroscopy guidance. During the period, we treated 25 consecutive children with CP who had progressive hip subluxation with coxa valga deformities. The indications for surgery were migration percentage > 30% and head-shaft angle > 155° with at least 2 years growth remaining. Of those, 13 patients underwent guided growth alone, and 48% (12) underwent a combination of guided growth and adductor tenotomy. Of the 25 patients treated with this approach, 96% (24) were available for follow-up with complete data at a minimum of 2 years follow-up (mean 50 months; range 25 to 72). All children (17 boys and seven girls; 48 hips) underwent surgery at a mean age of 8 years (range 5 to 12). With regard to the gross motor function classification system, three patients were Level 1, four patients were Level II, seven patients were Level III, seven were Level IV, and three were Level V. Radiographic parameters including the head-shaft angle, Hilgenreiner's epiphyseal angle, acetabular index, and Reimer's migration percentage were assessed before surgery and at the latest follow-up examination by one author (H-CH). Complications and reoperations were assessed by chart review. During the period in question, we generally offered secondary reconstructive surgery to patients who underwent a guided growth procedure once their subluxation progressed. RESULTS: With the data available, the coxa valga and lateral hip subluxation improved in terms of the reduction of head-shaft angle by a mean of 13° ± 7° (95% CI 11 to 15; p < 0.001) and the reduction of the migration percentage by 10% ± 11% (95% CI 7 to 13; p < 0.001). After controlling for potentially confounding variables like gender, gross motor function classification system, Hilgenreiner's epiphyseal angle and acetabular index, we found that longer follow-up duration (r = 0.234; p < 0.001) and a smaller preoperative migration percentage (r = -0.258; p = 0.004) were associated with larger changes in the head-shaft angle. In terms of complications, we found that the proximal femoral physis grew off the screw tip in 44% (21 of 48 hips) at a mean of 28 months. Among these, 31% of hips (15 of 48) in 33% of patients (eight of 24) underwent replacement with a longer screw. Among the 17% of hips (eight of 48) in 21% of patients (five of 24) who had progressive lateral subluxation and underwent secondary reconstructive surgery, we found that their preoperative acetabular index was higher (mean 29° versus 21°; p < 0.001), as was their head-shaft angle (mean 166° versus 162°; p = 0.045), and migration percentage (mean 54% versus 36 %; p < 0.001). CONCLUSIONS: Although guided growth with single transphyseal screw did not create as large a degree of varus as proximal femoral osteotomy, it did stabilize the hip in children with cerebral palsy with migration percentage less than 50% in our series. It is a simple procedure that can be of benefit to children with cerebral palsy with unstable hip. Reoperation in patients where the physis has grown off the screw tip can be a problem; fortunately, it is a rather minor procedure to replace with a longer screw. LEVEL OF EVIDENCE: Level III, therapeutic study.

A novel sequence variant in COL10A1 causing spondylometaphyseal dysplasia accompanied with coxa valga: A case report.

RATIONALE: Spondylometaphyseal dysplasia (SMD) is an extremely rare disorder of irregular development of spine and metaphyses of long tubular bones. Mutations in the collagen type X alpha 1 gene were found to underlie this condition. Previously reported mutations in the N-terminal non-collagenous NC2 domain and C-terminal non-collagenous NC1 domain failed to be identified in some specific patients. PATIENT CONCERNS: A 23-year-old male was referred to us for fixed, angular thoracolumbar kyphosis with semi-paralysis, numbness, and tremor on his left lower limb. Marked hypoplasia of thoracolumbar vertebra and spinal canal stenosis were observed on radiology. DIAGNOSES: He was diagnosed with spondylometaphyseal dysplasia (Type A4). Gene sequencing was performed using normalized targeted regions sequencing (TRS). A novel heterozygous missense variant p.Gly139Cys in the triple-helical region. Multiple lines of evidence imply this mutation to be pathogenic. INTERVENTIONS: Posterior instrumentation and vertebral column resection were given to correct his fixed, angular thoracolumbar kyphosis. OUTCOMES: The correction was satisfying and the functional outcomes were good. LESSONS SUBSECTIONS AS PER STYLE: The findings corroborated that type X collagen plays a critical role in the formation of the human spine as well as the long bones, and further expanded the range of type X collagenopathy. Surgical procedure could be considered for patients with severe malformation and neurological impairments.

Correction of distal femoral valgus deformities with fixator-assisted plating: How accurate is the correction?

OBJECTIVE: The aim of this study was to evaluate the results of fixator assisted correction of the distal femoral valgus deformities and the precision of the correction. METHODS: Seventeen extremities of 13 patients (7 women and 6 men; mean age: 16 ± 5.4 years) who had fixator assisted plating of the distal femur for genu valgum deformity were evaluated. Mechanical axis deviation (MAD) and mechanical lateral distal femoral angles (mLDFA) were measured pre-operatively and post-operatively. mLDFA was graded as perfect if it is between 85° and 90°(85° ≤ x ≤ 90°); overcorrection if it is between 91° and 95° (91° ≤ x ≤ 95°) and undercorrection if it is between 80° and 85° (80° ≤ x < 85°). Measurements beyond those limits were graded as a poor result. The position of the mechanical axis line with respect to center of the knee was graded from zone 1 to zone 4 pre-operatively and post-operatively. RESULTS: The mean follow-up period was 12.8 ± 3.7 months. The pre-operative and post-operative mLDFA was 70.5°±9.4° (range, 57°-82°) and 87.7° ± 3.5° (range, 80°-94°), respectively (p < 0.001). Based on post-operative standing radiographs, the correction was graded perfect in 12 femurs. The correction in three femurs were graded as overcorrection and graded as undercorrection in two femurs. Sagittal plane correction was also achieved in two femurs. Peroneal nerve decompression was done in three patients (5 extremities) with valgus deformity over 30°. The mechanical axes in all lower extremities were passing through zone 2 or more, pre-operatively, whereas the mechanical axes were in zone 2 or more in five extremities post-operatively. CONCLUSION: Fixator assisted plating is an effective treatment modality in patients with distal femoral valgus deformity. Although the technique enables to obtain significant correction in coronal plane it has the disadvantages of over- and undercorrection. Thus, we advise intraoperative confirmation of the correction under fluoroscopic control. LEVEL OF EVIDENCE: Level IV Therapeutic Study.

Determinants of Hip and Femoral Deformities in Children With Spastic Cerebral Palsy

OBJECTIVE: To find factors affecting hip and femoral deformities in children with spastic cerebral palsy (CP) by comparing various clinical findings with imaging studies including plain radiography and computed tomography (CT) imaging. METHODS: Medical records of 709 children with spastic CP who underwent thorough baseline physical examination and functional assessment between 2 to 6 years old were retrospectively reviewed. Fifty-seven children (31 boys and 26 girls) who had both plain radiography of the hip and three-dimensional CT of the lower extremities at least 5 years after baseline examination were included in this study. RESULTS: The mean age at physical examination was 3.6 years (SD=1.6; range, 2–5.2 years) and the duration of follow-up imaging after baseline examination was 68.4 months (SD=22.0; range, 60–124 months). The migration percentage correlated with motor impairment and the severity of hip adductor spasticity (R1 angle of hip abduction with knee flexion). The femoral neck and shaft angle correlated with the ambulation ability and severity of hip adductor spasticity (R1 and R2 angles of hip abduction with both knee flexion and extension). CONCLUSION: Hip subluxation and coxa valga deformity correlated with both dynamic spasticity and shortening of hip adductor muscles. However, we found no correlation between femoral deformities such as femoral anteversion, coxa valga, and hip subluxation.

Preoperative digital planning versus postoperative outcomes in total hip arthroplasty using a calcar-guided short stem: frequent valgization can be avoided.

INTRODUCTION: Modern total hip arthroplasty is largely dependent on the successful preservation of hip geometry. Thus, a successful implementation of the preoperative planning is of great importance. The present study evaluates the accuracy of anatomic hip reconstruction predicted by 2D digital planning using a calcar-guided short stem of the newest generation. METHODS: A calcar-guided short stem was implanted in 109 patients in combination with a cementless cup using the modified anterolateral approach. Preoperative digital planning was performed including implant size, caput-collum-diaphyseal angle, offset, and leg length using mediCAD II software. A coordinate system and individual scale factors were implemented. Postoperative outcome was evaluated accordingly and was compared to the planning. RESULTS: Intraoperatively used stem sizes were within one unit of the planned stem sizes. The postoperative stem alignment showed a minor and insignificant (p = 0.159) mean valgization of 0.5° (SD 3.79°) compared to the planned caput-collum-diaphyseal angles. Compared to the planning, mean femoral offset gained 2.18 (SD 4.24) mm, while acetabular offset was reduced by 0.78 (SD 4.36) mm during implantation resulting in an increased global offset of 1.40 (SD 5.51) mm (p = 0.0094). Postoperative femoroacetabular height increased by a mean of 5.00 (SD 5.98) mm (p < 0.0001) compared to preoperative measures. DISCUSSION: Two-dimensional digital preoperative planning in calcar-guided short-stem total hip arthroplasty assures a satisfying implementation of the intended anatomy. Valgization, which has been frequently observed in previous short-stem designs, negatively affecting offset, can be avoided. However, surgeons have to be aware of a possible leg lengthening.

Outcome of extensive varus and valgus stem alignment in short-stem THA: clinical and radiological analysis using EBRA-FCA.

INTRODUCTION: The principle of implanting a calcar-guided short stem consists of an individual alignment alongside the medial calcar providing the ability of reconstructing varus and valgus anatomy in a great variety. However, still, there are broad concerns about the safety of extensive varus and valgus positioning in regard to stability, bony alterations, and periprosthetic fractures. MATERIALS AND METHODS: 216 total hip arthroplasties using a calcar-guided short stem (optimys, Mathys Ltd.) in 162 patients were included. Depending on postoperative CCD angle, hips were divided into five groups (A-E). Varus- and valgus tilt and axial subsidence were assessed by "Einzel-Bild-Roentgen-Analyse"(EBRA-FCA, femoral component analysis) over a 2-year follow-up. The incidence of stress-shielding and cortical hypertrophy as well as clinical outcome [Harris Hip Score (HHS)] were reported. RESULTS: Postoperative CCD angles ranged from 117.9° to 145.6° and mean postoperative CCD angles in group A-E were 123.3°, 128.0°, 132.4°, 137.5°, and 142.5°, respectively. After 2 years, the mean varus/valgus tilt was -0.16°, 0.37°, 0.48°, 0.01°, and 0.86°, respectively (p = 0.502). Axial subsidence after 2 years was 1.20, 1.02, 1.44, 1.50, and 2.62 mm, respectively (p = 0.043). No periprosthetic fractures occurred and none of the stems had to be revised. Rates of stress-shielding and cortical hypertrophy as well as HHS showed no significant difference between the groups. CONCLUSIONS: Valgus alignment results in increased subsidence but does not affect the clinical outcome. There is no difference in stress shielding and cortical hypertrophy between the groups. The authors recommend long term monitoring of valgus aligned stems.

Finite element analysis of mechanical behavior of human dysplastic hip joints: a systematic review.

Developmental dysplasia of the hip (DDH) is a common condition predisposing to osteoarthritis (OA). Especially since DDH is best identified and treated in infancy before bones ossify, there is surprisingly a near-complete absence of literature examining mechanical behavior of infant dysplastic hips. We sought to identify current practice in finite element modeling (FEM) of DDH, to inform future modeling of infant dysplastic hips. We performed multi-database systematic review using PRISMA criteria. Abstracts (n = 126) fulfilling inclusion criteria were screened for methodological quality, and results were analyzed and summarized for eligible articles (n = 12). The majority of the studies modeled human adult dysplastic hips. Two studies focused on etiology of DDH through simulating mechanobiological growth of prenatal hips; we found no FEM-based studies in infants or children. Finite element models used either patient-specific geometry or idealized average geometry. Diversities in choice of material properties, boundary conditions, and loading scenarios were found in the finite-element models. FEM of adult dysplastic hips demonstrated generally smaller cartilage contact area in dysplastic hips than in normal joints. Contact pressure (CP) may be higher or lower in dysplastic hips depending on joint geometry and mechanical contribution of labrum (Lb). FEM of mechanobiological growth of prenatal hip joints revealed evidence for effects of the joint mechanical environment on formation of coxa valga, asymmetrically shallow acetabulum and malformed femoral head associated with DDH. Future modeling informed by the results of this review may yield valuable insights into optimal treatment of DDH, and into how and why OA develops early in DDH.

Risk factors of avascular necrosis of the femoral head and fixation failure in patients with valgus angulated femoral neck fractures over the age of 50 years.

INTRODUCTION: The aim of our study was to identify the risk factors for avascular necrosis of the femoral head (AVN) and fixation failure (FF) after screw osteosynthesis in patients with valgus angulated femoral neck fractures. PATIENTS AND METHODS: We conducted a retrospective study of 308 patients (mean age, 72.5 years, range, 50-97 years), with a mean follow-up of 21.4 months (range, 12-64 months). The risk for failure in treatment (FIT) associated with patient- and fracture-related factors was evaluated by logistic regression analyses. RESULTS: FIT was identified in 32 cases (10.3%): 22 cases (7.1%) of AVN and 10 cases (3.2%) of FF. Initial valgus tilt>15° (p=0.023), posterior tilt>15° (p=0.012), and screw sliding distance (p=0.037) were significantly associated with FIT. FIT occurred in 7 patients (5.2%) with B1.2.1 fractures and 17 patients (48.6%) with B1.1.2 fractures (p<0.001). The odds of FIT were 17-fold higher in patients with initial valgus and posterior tilts>15° (B1.1.2) compared to patients with <15° of tilt in both planes (B1.2.1). CONCLUSION: The severity of initial deformity predicts AVN and FF in patients with valgus angulated femoral neck fractures. Patients with an initial valgus and posterior tilt>15° are reasonable candidates for primary arthroplasty due to high risk of FIT.